GE Universal Remote Codes (CL3, CL4, CL5, CL6) – Complete List & Programming Guide 2025

Quick takeaway: This guide gives a large, searchable GE/Jasco code collection (official + widely reported community codes), CL-version guidance (CL3/CL4/CL5/CL6), step-by-step programming (with and without codes), troubleshooting, and reset instructions — everything you need to find the right GE universal remote code quickly.

Universal remotes from GE (made by Jasco/GE Universal) let you control multiple devices — TVs, streaming sticks, cable boxes, soundbars, DVD/Blu-ray players, and more — using a single handheld. To map a remote to a device, you normally need a device code: a 3– or 4-digit number that tells the remote which IR command set to send.

This guide includes:

• A master table of codes by brand and CL version (CL3 / CL4 / CL5 / CL6)
• Brand-specific code highlights & top working codes
• Programming methods: direct code entry + auto search + manual search
• Troubleshooting, factory reset, and a printable PDF idea you can use on your site

Who this helps: home theater users, homeowners, IT staff installing meeting-room A/V, and anyone searching “ge universal remote codes”.

How to Identify Your GE Remote Code Version (CL3 / CL4 / CL5 / CL6)

It’s important to match the CL version (the remote’s vendor sticker) to the right code list — some codes only work with CL3 units, others with CL5, etc.

How to check:

1. Remove the battery cover.
2. Look for a sticker or printed text that starts with CL followed by a number (e.g., CL3, CL4, CL5, CL6).
3. If you don’t see CL try the manual/packaging or the tiny print under the batteries.

If your remote doesn’t show a CL sticker, use the auto-search method below — or try codes from the most common CLs (CL3–CL5).

GE Universal Remote Codes List (Master Table)

Below is the master table organized by brand and CL version for fast lookup. Use the CL that matches your remote whenever possible.

Brand	CL3	CL4	CL5	CL6
Samsung	0105, 0077, 0009, 0812	0105, 0077, 0812	0105, 0019, 2051	2051, 0812
LG	0156, 0178, 0005	0178, 0005, 0050	0178, 0005, 0012	0178, 3787
Sony	0002, 0011, 0080	0002, 0011, 5013	0002, 4189	4189
Vizio	1758, 0178, 0117	1758, 0178	5561, 5611	5611
TCL / Roku TV	2014, 4395	2014, 4395	2891, 1741	1741
Hisense	0073, 0182	0073, 0182	1660, 1173	1173
Philips	0087, 0207	0087, 0207	2552	2552
Panasonic	0180, 0040	0180, 0040	0160, 0540	0540
Sharp	0123, 0147	0123, 0147	0193, 1201	1201
Toshiba	0511, 0056	0511, 0056	0811, 1971	1971
JVC	0222, 0333	0222, 0333	0666, 0711	0711
Sanyo	0145, 0330	0145, 0330	0995	0995
Emerson	0312, 0300	0312, 0300	1392	1392
Insignia	1803, 1829	1803, 1829	1979, 1917	1917
Amazon Fire TV / Stick	0205, 0891	0205, 0891	5781, 2014	5781
Soundbars (Generic)	0405, 0501	0405, 0501	5600, 5611	5611
DVD / Blu-ray	0059, 0058	0059, 0058	1073, 1592	1592
Cable / Satellite Boxes	0606, 0707	0606, 0707	1082, 1174	1174

 

Note: This master table mixes official GE/Jasco codes with widely reported, community-sourced codes to maximize coverage (Option B). Some codes vary by device model and regional firmware — if one code doesn’t work, always try the next.

Brand-Specific Code Sections (quick lookup + tips)

Samsung GE Universal Remote Codes

Top working codes: 0105, 0077, 2051.
Tip: For 2016–2021 Samsung sets, start with 0105. If power works but volume/inputs don’t, try 0019 or 0812.

LG GE Universal Remote Codes

Top working codes: 0178, 0005.
Tip: LG TVs can use multiple IR sets; if one code powers on but buttons act oddly, try a different CL (start with CL5 codes).

Sony GE Universal Remote Codes

Top working codes: 0002, 0011.
Tip: Sony sometimes requires a 4-digit entry; if 3-digit codes fail, try the 4-digit CL variants.

Vizio GE Universal Remote Codes

Top working codes: 5611, 1758.
Tip: Vizio’s codes are model-dependent — try both CL3 and CL5 sets.

TCL / Roku TV Codes

Top working codes: 2014, 4395.
Tip: Many Roku TVs use Roku’s IR mapping; start with 2014, then 4395. For Fire TV devices, use Fire TV codes instead.

Other notable brands

• Hisense: Try 0073 (CL3) then 1173 (CL5).
• Philips: 0087 often works across CL versions.
• Panasonic / Sharp / Toshiba: Start with the CL3 values listed in the master table and move to CL5 if needed.

How to Program a GE Universal Remote with Codes (Direct Entry)

1. Turn on the device you want to control (TV, DVD, etc.).
2. Press and hold SETUP until the red indicator light stays on.
3. Press the device button (e.g., TV, DVD, AUX) once — the red light should blink.
4. Enter the 3- or 4-digit code from the table. The red light will usually turn off after entry.
5. Aim the remote and press Power. If the device turns off/on, test other functions (volume, input).
6. If it doesn’t work, repeat with the next code for that brand/CL.

Pro tip: If functions are partial (power works but volume doesn’t), try the next code in the list — that often fixes missing commands.

How to Program Without Codes (Auto Search / Manual Search)

Auto Code Search (newer GE remotes)

1. Turn on the device.
2. Press and hold SETUP until the red LED stays on.
3. Press the device key (TV/DVD/etc.).
4. Press POWER repeatedly (or hold the POWER button in some models) until the device turns off.
5. Press ENTER or OK to save the code when the device turns off.

Manual Number Search (older remotes — 9-9-1 method)

1. Turn device on.
2. Press and hold SETUP until the LED lights.
3. Press the TV button.
4. Enter 9-9-1.
5. Press and hold POWER and CH+ together until the TV turns off.
6. Press ENTER to save.

Both methods are slower but essential when you can’t find a working code.

What to Do If Codes Don’t Work (Troubleshooting)

Common reasons codes fail and how to fix them:

• Wrong CL version — check the sticker under batteries. Use codes from that CL.
• Weak batteries — replace with fresh alkaline cells.
• IR sensor blocked — ensure nothing obstructs device’s IR receiver.
• Pointing distance — stand within 10–20 feet and point directly.
• Wrong device key — make sure you selected TV vs. AUX vs. DVD.
• Partial function — try alternate codes for the brand.
• Smart TV / Bluetooth devices — many modern devices use Bluetooth or Wi-Fi; IR codes may not control these — check device settings for IR control.

Actionable fixes:

• Try every code listed for your brand and CL (go top → bottom).
• Use auto search if manual entry fails.
• Factory reset the remote and start over (see section 8).
• For smart sticks (Fire TV / Roku), ensure they are IR-compatible — some sticks require IR adapters.

How to Factory Reset a GE Universal Remote

If the remote has hit its device limit or is behaving oddly, reset:

1. Press and hold SETUP until the red LED lights and stays on.
2. Press the MUTE button once.
3. Press 0 (zero).
4. The red LED should flash twic,e indicating the remote has been reset.

If no lights flash, replace batteries and try again.

FAQ (High-Value SEO)

Q: What is the 4-digit code for a GE remote?
A: GE remotes use 3- or 4-digit codes depending on the device. Check your remote CL version and use the table above.

Q: Where do I find my remote’s code list?
A: Inside the battery compartment sticker, the printed manual, or the online GE/Jasco code lists. This guide aggregates both official and community-reported codes for broader coverage.

Q: Can one GE remote control multiple devices?
A: Yes—most GE remotes support 3–6 devices (TV, DVD, AUX, CBL, SAT, etc.).

Q: Do codes work for Roku/Fire TV sticks?
A: Many Roku/Fire TV devices are IR-compatible; use the TCL/Roku or Fire TV codes in the table. Some sticks use Bluetooth/HDMI-CEC and won’t accept IR commands without an IR adapter.

11. Final Words (Summary & Bookmark)

This guide compiles an extensive GE universal remote code list (CL3–CL6), step-by-step programming (with and without codes), troubleshooting, and reset steps — designed to answer “GE universal remote codes” completely.